Alat Laboratorium Aspal

  • For measuring the deflection of flexible pavement under the action of moving wheel loads.
    • Fixed Beam :  Alumunium profile frame, 3 points adjuster, with vibrator and dial holder. Alumunium strip arm, 1 : 2 level ratio.
    • Tire Gauge : 120 psi capacity.
    • Surface Thermometer : Range 0 – 100 deg.C.
    • Dial Indicator : Range 30 x 0.01 mm.
  • Standard Testing :  ASTM D-2172  /  AASHTO T-164; According SNI 03-6894-2002 For determining bitument content in hot mixed paving and pavement samples. Consist of :
    • Centrifuge Extractor : Electric, 220 V-AC, variable speed DC motor up to 3600 rpm, alumunium housing, removeable cover and bowl,1500 gram capacity.
    • Filter Paper : Low ash filter paper, box of 50 sheet.
    • Solvent : Perchloraethylen (PCE), bottled.
    Dimension (l x w x h): 60 x 40 x 60 cm / Gross weight: 50 Kg
  • Flash and Fire Point

    ASTM D-92  /  AASHTO T-48 For determining flash and fire point by cleveland open cup for petroleum product and other liquids, except fuel oils and materials having an open flash point below 79°C (173°F) as determined by the cleveland open cup tester. Consist of :
    • Flash Cup: Brass, insulation handle.
    • Burning Pipe : Brass pipe, insulation handle.
    • Flash Cup Plate : Steel Plate.
    • Support : Adjustable height metal, thermometer holder.
    • Y-Connector : Brass, provided with gas hose.
    • Bunsen Burner : Heat resources.
    • Thermometer : Astm  11 C, 6 to 400°C.
    Dimension (l x w x h) : 150 x 30 x 30 Cm / Weight (approx) : 8 Kg
  • ASTM D-402  /  AASHTO T-78 Consist of :
    • Flask : Heat resistance glass 500 ml capacity, with side arm.
    • Condenser : Glass, jacketed.
    • Adapter :Heat resistance glass.
    • Shield : Metal, absestos lined, glass window.
    • Shield and Flask Support : Variable height adjustment.
    • Support and Clamp : Metal, provided with clamps.
    • Bunsen Burner : Heat resource.
    • Asbestos Wire Gauze : Asbestos centre, 15 cm x 15 cm.
    • Graduated Cylinder : 100 ml capacity.
    • Thermometer : ASTM  7 C, 2 to 300 deg.C.
    Dimension (l x w x h) : 100 x 80 x 80 cm / Gross weight : 10 Kg
  • Standard Testing :  ASTM D-113  /  AASHTO T-51; According SNI 06 -2432-1991 For determining ductility of formed asphalt/ cement or semi solid bitument by measuring distance of elangation before breaking point when two end of briquet are pulled a part at a specific speed and temperature. Consist of :
    • Ductility Mold : Form sample shape and hold end during  test, made of brass, provided with base.
    • Ductility Machine : Electric 220 V-AC, stainless steel bath, provided with temperature control.
    • Pulling speed  : 5 cm/min,  / Travel range   : 150 cm.
    Dimension (l x w x h) : 244 x 80 x 80 cm / Gross weight : 150 Kg
  • by Cleveland Open Cup Electric heating

    ASTM D-92  /  AASHTO T-48 For determining flash and fire point by cleveland open cup for petroleum product and other liquidexcept fuel oils and materials having an open flash point below 79°C (173°F) as determined by the cleveland open cup tester. Consist of :
    • Flash Cup : Brass, insulation handle.
    • Cleveland Electric : Electric, 220 V-AC, heating speed control.
    • Thermometer : Astm  11 C, 6 to 400°C.
    Dimension (l x w x h) : 150 x 30 x 50 Cm / Weight (approx) : 20 Kg
  • Standard Testing :  ASTM D-5 / AASHTO T-49 For determining  consistency of bituminous materials. Consist of :
    • Penetrometer : Electric control box, 220 V-AC variable timer, ON-OF and START switch for automatic plunger release cast alumunium frame, 4 1/2″ dial indicator, 400 x 0.1 mm dial, knob control. manual electric, weight of needle and flunger : 50 gr.
    • Penetration Needle : Steel needle with brass shank, 1 mm dia.
    • Transfer Dish : Glass, 100 mm i.d approx.
    • Thin Box : (sample container) 55 mm i.d approx, alumunium sheet, seamless.
    Dimension (l x w x h) : 50 x 50 x 70 cm / Gross weight : 25 Kg
  • ASTM   D-6/D-1754 ;   AAHSTO T-47/T-179;  According SNI 06-2440-1991 For determining the loss in mass (exclusive of water) of asphaltic  compounds after heating. Consist of :
    • Revolving Shelf Oven : Variable temperature oven, cast alumunium rotating  shelf, 5-6 rpm, external electromotor drive, 220 V-AC, 1400 Watt.
    • Thin Box : 55 mm i.d. approx, alumunium sheet, seamless.
    • Thermometer : Astm  13 C, 155 to 170°C.
    Dimension (l x w x h) : 100 x 100 x 100 Cm / Weight (approx) : 45 Kg
  • Standard Testing :  ASTM D-2172  /  AASHTO T-164 / RSNI M-05-2004 For determining bitument content in hot mixed paving and pavement samples. Consist of :
    • Glass Jar : Glass made, pyrex material, 6inch.
    • Funnel : Two wire mesh screen cone.
    • Condensor : Brass / copper.
    • Hot Plate : 220 V-AC, 1000, single burner.
    • Filter Paper : Low ash filter paper, box of 50 sheet.
    • Asbestos Wire Gauze : Asbestos center, 15 cm x 15 cm.
    Dimension (l x w x h) : 90 x 50 x 50 cm / Gross Weight : 15 Kg

Title

Go to Top