- Mechanical Loading Machine : Electric, 220 V-AC, 1/2 HP, 1 Phase, speed 0.05″/min reversing switch 10.000 lbs capacity.
- CBR Mold : Machine steel, 6″ i.d, 7″ height, 2″ height of collar.
- Spacer Dish : Machine steel, 5 15/16″ diameter, 2.416″ height.
- Cutting Edge : Machine steel, sharp edge.
- Circular Surcharge Weight : Machine steel, 5 7/8″ o.d, 2 1/8″ i.d, 5 lbs weight.
- Slotted Surcharge : machine steel, 5 7/8″ o.d, 2 1/8″ slotted width, 5 lbs weight.
- Swell plate : Alumunium with adjustable stem.
- Swell Tripod : Alumunium for mounting sweel dial gauge.
- Modified Proctor Hammer : machine steel, plated, 2″ dia, 18″ drop height,10 lbs weight.
- Filter Paper : 6 inch diameter., 100 sheets/ box.
- Proving Ring : 6.000 lbs capacity.
- Dial Indicator : Measuring range 0.01″ x 1″.
- Swell Dial Penetration : Range 30 mm x 0.01 mm.
- Square Pan : Galvanized steel, 65 x 65 x 7.5 cm.
- Thin Box : Alumunium, 60 gr capacity.
- Graduated Cylinder : Plastic made, 1000 ml capacity, single numberin.
- Scoop : Cast alumunium, large size, round buttom.
- Trowel : Pointed type, wooden handle.
- Straight Edge : Galvanized steel, 300 mm length, for leveling samples in mold.
-
ASTM D-1883 / AASHTO T-193; According SNI 03-1744-1989 For determining the bearing ratio of soil. Consist of : -
For determining coeffisient of permeability of compacted soil sample Consist of :- Compaction Permeameter : 1/30 cu. ft. mold , 4 inch i.d,inlet-outlet connector, overflow valve, porous stone.
- Frame : Cast alumunium base, alumunium column, 3 burette (5, 10, 15 mm diameter).
- Graduated Cylinder : Glass made,100 ml capacity,single numbering.
- Stop Watch : Precision timer, stainless steel body, 60 sec sweep x 30 min
-
Consolidation Test set untuk kebutuhan alat laboratorium teknik sipil anda. Segera hubungi kami untuk detail, surat penawaran atau pemesanan. SO-515 Consolidation Test Set ASTM D-2435 AASHTO T-216 For determining the rate and magnitude of consolidation of soil when it is restrained laterally, loadded and drain axially. SO-516 Consolidation Frame Consist of : SO-516.1 Frame Cast alumunium, two test unit 1 Set SO-516.2 Loading Set Three alternative lever arm 1: 9, 1: 10, 1: 11 2 Set SO-517 Consolidometer Brass, 50.5 mm sample dia., porous stone, loading cap. 2 Set SO-518 Loads Slotted, machined steel Consist of : SO-518.1 Load 500 gr 4 Pcs SO-518.2 Load 1000 gr 2 Pcs SO-518.3 Load 2000 gr 2 Pcs SO-518.4 Load 4000 gr 2 Pcs SO-518.5 Load 8000 gr 2 Pcs SO-519 Sample Tubes Machine steel, 50.5 mm dia., galvanized, with extruder 1 Set GE-135 Dial Indicator Range 10.0 mm x 0.01 mm 2 Pcs GE-840 Wire Saw 10 cm length approx. 1 Pc Also required, but not part of this set: SO-450 Moisture Content Test Set GE-521 Wash Bottle GE-700 Stop Watch GE-710 Vernier Caliper GE-820 Spatula Dimension ( l x w x h) : 80 x 80 x 150 cm Gross Weight : 130 kg -
ASTM D-2435 / AASHTO T-216 For determining the rate and magnitude of consolidation of soil when it is restrained laterally,loaded and drained axially. Consist of :- Frame : Cast alumunium, two test unit.
- Loading set : Three alternative lever arm 1:9, 1:10, 1:11.
- Consolidometer : Brass, 50.5 mm sample dia.,porous stone,loading capacity.
- Loads : 500 gr weight.
- Loads : 1000 gr weight.
- Loads : 2000 gr weight.
- Loads : 4000 gr weight.
- Loads :8000 gr weight.
- Sample Tube : Machine steel, 50.5 mm dia.galvanized, with extruder.
- Dial Indicator : Range 10 mm x 0.01 mm.
- Wire Saw : 10 cm length approx.
-
For determining cone resistance and friction resistance of soil layers. Consist of :- Press-In Apparatus : Steel construction, manually operated 2.5 tons capacity.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor Machined steel.
- Spiral Anchor : Machined steel, welded 1.5 m length.
- Handle And T-piece : Machined steel, welded.
- Mantel Cone : Precision machine steel hardened tip, tappered thread. 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm dia.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench, allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1). (1 Set)
- Long Fasten Press : 1.5 m length, 8 cm width.
- Short Fasten Press : 1 m length, 12 cm width.
- Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
- Manometer : 250 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
-
ASTM D3441 For determining cone resistance and friction resistance of soil layers. Consist of :
- Press-In Apparatus : Steel construction, manually operated 5 tons capacity.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor : Machined steel.
- Spiral Anchor : Machined steel, welded 1.5 m length.
- Handle And T-piece : Machined steel, welded.
- Mantel Cone : Precision machine steel hardened tip, tappered thread. 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench, allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1). (1 Set)
- Fasten press : Beam Cannal.
- Long Fasten Press : 1.8 m length, 12 cm width.
- Short Fasten Press : 1.2 m length, 15 cm width.
- Manometer : 60 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
- Manometer : 500 kg/ cm² cap, single pointer, 6″ dia, lower mount connection.
-
UJI CBR TEST I DCP TEST I DYNAMIC CONE PENETROMETER I ALAT LABOR TANAH For determination of field CBR value (rapid quality control)Consist of :- Handle : Stainless steel.
- Hammer : Machined steel, Painted, 8 kg weight.
- Guide Rod : Stainless steel, 16 mm diameter, drop height 575 mm.
- Anvil : Machined steel, welded painted.
- Penetration Rod : Stainless steel, 16 mm dia, 107 cm length, 75 cm effective.
- Cone : Hardened tool steel cone tip, 60 deg. angle, 20 mm dia., stainless steel adaptor.
- Penetration Scale : Stainless steel, 16 mm dia, 100 cm scale.
- Carrying Bag : Water proof cloth.
- Open End Wrench : Vanadium steel 12/13, 14/15.
-
ELECTRIC SAMPLE EXTRUDER
For extruding soil speciment from 68 mm dia sampling tube (HAND BOR part), electric, 220 Volt, 750 Watt, 1 Phase. Supplied without sampling tube. Dimension (l x w x h) : 40 x 50 x 130 Cm / Gross weight : 60 Kg -
ASTM D-3441 / SNI 2827-2008 For determining cone resistance and friction resistance of soil layers. Consist of :- Hydraulic Driving Appliance : Steel construction, hydraulic operated 10 Ton Capacity Design with double cylinder pressure, sounding speed 2 cm/ sec. incorporated two wheel integral with the driving appliance. Penetration measuring scale, 100 cm assembly on body. The standard measuring device is equipped with two pressure gauges.
- Manometer : 100 kg / cm² capacity, lower mount connection.
- Manometer : 1000 kg / cm² capacity, lower mount connection.
- Power Unit : Hydraulic pump incorporated in governor matched to the installed petrol engine, 13.5 HP, hand starter.
- Sounding Rod : Machined steel, 36 mm o.d., 1 mtr effective length, tappered thread.
- Plunger Rod : Round bar, 15 mm dia, 1 mtr length.
- Push Adaptor : Machined steel.
- Pull Adaptor : Machined steel.
- Anchoring Pickets : Machined steel, welded, spiral type anchor with screw pickets, 1.4 metre length.
- Hydraulic Spanner : Machined steel, hydraulic gear box powered with variabel speed gasket, additional hand spanner for spare.
- Mantel Cone : Precision machine steel hardened tip, tappered thread 60º angle, 35.7 mm diameter.
- Friction Cone : Precision machine steel hardened, with friction jacket, tappered thread 60º angle, 35.7 mm diameter.
- Wrenches Set : Pipe wrench (2), adjustable wrench (1), spanner wrench (1) allen key (1), screw driver (1), oil can (1), steel brush (1), piston wrench (1), seals tape (2), oil seals (2), steel box (1).
- Long Fasten Press : Beam cannal, 160 cm length, 15 cm width.
- Hydraulic Hose : Flexible hose with push/ pull coupler. 300 cm length, 10.000 psi capacity.
- Field Trolley : Fillin sounding apparatus.
-
Liquid Limit Test Set ASTM D-4318 AASHTO T-89 For determining liquit limit of soil sample. SO-311 Liquid Limit Device Hand operated, brass cup, hard rubber base 1 Set SO-312 ASTM Grooving Tool Machined steel, head gauge 1 Pc SO-313 Cassagrande Grooving Tool Brass plate 1 Pc GE-390 Thin Box Alumunium, 60 gr capacity 12 Pcs GE-396 Glass Plate Galss, 10 mm thick, 30 x 30 cm 1 Pc GE-402 Graduated Cylinder 100 ml capacity 1 Pc GE-501 Porcelain Dish 12 cm dia., 250 ml capacity 1 Pc GE-820 Spatula 150 mm blade 1 Pc GE-825 Scraper 100 mm blade 1 Pc Also required, but not part of this set: SO-450 Moisture Content Test Set AG-232A Sieve No. 40 AG-250 Pan & Cover GE-511 Mortar and Pastle GE-521 Wash Bottle -
Specific Gravity (Heating Method) untuk kebutuhan alat laboratorium teknik sipil anda. Segera hubungi kami untuk detail, surat penawaran atau pemesanan.Dimension (l x w x h) : 40 x 40 x 40 cm Gross Weight : 10 kg ASTM D-854 AASHTO T-100 For determining specific gravity of soil sample. GE-191 Hot Plate Electric, 220 V 1 Pc GE-237 Asbestos Wire Gauze 15 cm x 15 cm 1 Pc GE-363 Mixing Bowl Stainless steel, 250 mm dia. 1 Pc GE-441 Density Bottle 100 ml capacity 3 Pcs GE-473 Funnel Glass 1 Pc GE-521 Wash Bottle 250 ml capacity 1 Pc GE-601 Thermometer Range 0 – 100oC 1 Pc Also required, but not part of this set:AG-218A Sieve No. 4AG-250 Pan & CoverGE-150 Cent O-Gram BalanceGE-174 Drying OvenGE-452 DessicatorGE-749 Asbestos Gloves -
For determining the moisture content of soil by means of calcium carbide gas pressure meter. Consist of :- Speedy Gauge : M/C range 0-20 %, sens. : 0.2 %, sample weight 20 gr.
- Speedy Balance : Digital 200 gr capacity x 0.1 gr sensitivity.
- Calcium Carbide :Reagent absorbent, CaC₂ calcium carbide
- Measuring Spoon : Cast alumunium.
- Crushing Ball : Steel ball, 31,7 mm diameter
- Cleaning Brush : Plastic brush/ plastic holder
- Carrying Case : Wooden case with handle